Everbuild 203 5L Accelerator & Frostproofer

A liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period in cold weather
This admixture is even effective in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture when mixed with neat cement
This admixture is a non corrosive formula and conforms to EN934-2
As an accelerator: Add to gauging water at a rate of 2.5 to 5 litres per 50kg cement depending on the degree of acceleration required
Note: remember to reduce required quantity of water accordingly
As a frostproofer: Add to gauging water at a rate of use 2.5ltrs/50kg cement for protection down to 4 degrees and 5ltrs/50kg cement for protection down to 8 degrees, again, reducing required quantity of water accordingly
As a plugging aid: Mix neat with fresh cement and place immediately
Note: Concrete must be covered after placing until the minimum strength is obtained or until the temperature rises above freezing
Do not use with high alumina cement
Size: 5L
Product Code: 488853